Skip to content
Service-Disabled Veteran-Owned (DVBE)
SDVOSB ‣ DVBE

Head Protection

 

It is the responsibility of the employer to ensure that their employees wear a protective helmet when working in areas where there is a potential for injury to the head from impact with an object or from falling objects (29 CFR 1910.135). In addition OSHA requires that employers provide eye and face protection whenever necessary to protect against chemical, environmental, radiological or mechanical irritants and hazards. Twenty-percent of workplace fatalities are related to head trauma (Tiesman et al., 2011)

Get a Quote

Head injuries may be caused by falling or flying objects, or by bumping the head against a fixed object. Protective helmets must do three things; Resist penetration, absorb the shock of a blow, protect against electrical shock. Head injuries may be prevented by the selection and use of appropriate head protection.

  • Hard hats are designed to provide protection from impact and penetration hazards caused by falling objects. Hard hats must be worn when working below other workers who are using tools and materials which could fall. OSHA standard [ANSI Z89.1-1986]
  • Hard hats are designed to provide protection from impact and penetration hazards caused by falling objects. Hard hats must be worn when working below other workers who are using tools and materials which could fall. OSHA standard [ANSI Z89.1-1986]
  • Materials used in helmets must be water-resistant and slow burning. OSHA standard [ANSI Z89.1-1986]
  • Each helmet must consist of a shell and suspension system (such as a head band). OSHA standard [ANSI Z89.1-1986]
  • Helmets must have suspension systems (such as head bands) that are adjustable to prevent the helmet from falling off the head. OSHA standards [ANSI Z89.1-1986]


Lift hard hats are a stylish design influenced by motocross culture and are the most cutting edge hard hat design to date.